Generate KERALA UNIVERSITY Class 3 mechanics of solids Question Paper
Create exam-ready question papers instantly using ZenQB AI. Perfect for teachers and students.
Sample Questions
- (b) A bar of 20 mm diameler is lesled in tension. It is observed that when a load of 40 KN is applied, the exlension measured over a gauge length of 200 mm is 0.12 mm and contraction in diametor is 0....
- A bar of 20 mm diameter is tested in tension. It is observed that when a load of 37.7 kN is applied, the extension measured over a gauge length of 200 mm is 0.12 mm and contraction in diameter is 0.00...
- A Simply supported beam AB of span 4 meters is subjected to two point loads of 2 kN each at C and D , dislances of 1.5 m and 3 m from the left end. Calculate the shear force and bending moment values ...
- A beam of 8 m span simply supported at its end carries loads of 2 kN and 4 kN at a distance of 3 m and 6 m respectively from right support. In addition, the beam carries a UDL of $4 \mathrm{kN} / \mat...
- Define the relationship between young's Modulus and modules of rigidity